About
AI Solutions
Testimonials
Articles
Contact
contact

We use third-party cookies in order to personalise your site experience. View Policy here.

PreferencesAcceptdecline
Manage Consent Preferences by Category
Essentials
Always active

Necessary for the site to function. Always On.

Used for targeted advertising.

Remembers your preferences and provides enhanced features.

Measures usage and improves your experience.

Reject AllAccept All
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Preferences

Presien End User Licence Agreement

Thanks for choosing Presien. These terms explain what you can do with our technology, who owns what, and what each of us is responsible for. We’ve tried to keep them clear and readable, but they are a legally binding contract, so please read them carefully.

The short version

  • This is a contract between your business and Presien, even if you bought your system from one of our partners and it carries their brand.

  • You get a licence (not ownership) to use the Presien Technology in your business, per device, while your subscription is active.

  • You own your data, including footage and reports. Presien owns its AI models and the data it derives through the Presien Technology.

  • You give us a permanent licence to use your data to run the service and to train and improve our AI. If you’d prefer we didn’t train on your data, you can buy a Training Opt-Out.

  • The Presien Technology helps people spot hazards and make worksites more productive. It is not a primary safety control and does not replace safe systems of work, trained operators or human judgement.

  • You’re responsible for telling your workers and site visitors about cameras, and for getting any consents the law requires.

  • Our liability is limited, and you’re responsible for how your people use the technology.

This summary is for convenience only. The full terms below apply.

1. About this Agreement

1.1 Who we are and who you are

This End User Licence Agreement (the “Agreement”) is a contract between PFP Robotics Pty Ltd ACN 623 308 289 trading as Presien, of 101/4 Cornwallis Street, Eveleigh NSW 2015, Australia (“Presien”, “we”, “us” or “our”), and the business or organisation that obtains the right to use the Presien Technology (“you” or “your”).

1.2 What this Agreement covers

This Agreement applies to all Presien Technology you use.

1.3 Products sold under a Channel Partner’s brand

We supply the Presien Technology directly and through Authorised Channel Partners, some of whom sell it as part of their own products and under their own brand names. If you obtained a product or service from an Authorised Channel Partner that runs on Presien Technology, this Agreement applies to your use of the Presien Technology. Nothing in your arrangements with the Channel Partner gives you any ownership of, or rights in, the Presien Technology beyond the licence in this Agreement.

2. Accepting this Agreement

2.1 How you accept

This Agreement becomes binding on you on the earliest of:

(a)you (or someone authorised by you) signing or otherwise accepting an Order, with us or with an Authorised Channel Partner, that refers to or incorporates this Agreement;

(b)you issuing a purchase order to us or to an Authorised Channel Partner for products or services that include the Presien Technology, after an Order, quote or other document referring to this Agreement has been given to you; or

(c)you or any of your Users installing, activating, accessing or using any part of the Presien Technology (even if the Presien Technology was made available to you by an Authorised Channel Partner).

2.2 Buying through an Authorised Channel Partner

If you obtain the Presien Technology through an Authorised Channel Partner:

(a)the Channel Partner is authorised by Presien to present this Agreement to you and to obtain your acceptance of it on Presien’s behalf, and this Agreement is a direct contract between you and Presien;

(b)we may enforce this Agreement against you directly, whether or not the Channel Partner also has rights against you; and

(c)no Authorised Channel Partner has authority to change this Agreement, or to make any promise, warranty or representation about the Presien Technology on Presien’s behalf, and any such change, promise, warranty or representation is the Channel Partner’s responsibility alone.

2.3 If you don’t agree

If you do not agree to this Agreement, you must not use the Presien Technology. Please contact us or your Authorised Channel Partner.

2.4 Your Users

You may allow your Users to use the Presien Technology on your behalf, provided you comply with this Agreement.

2.5 Which terms apply

If there is any inconsistency between the documents that make up this Agreement, the following order applies (highest first):

(a)a written agreement signed by Presien and you that expressly states it varies or overrides this Agreement;

(b)any terms in an Order that are specific to the Presien Technology, but only if the Order is signed by Presien (and not only by an Authorised Channel Partner);

(c)this Agreement, including any data processing addendum referred to in clause 5.10; and

(d)the Documentation.

3. Your licence

3.1 Licence

Subject to this Agreement and to payment of all applicable Fees, Presien grants you a non-exclusive, non-transferable, non-sublicensable licence, during the Subscription Term, to:

(a)use the Device Software, in machine-readable form only, on the Licensed Devices on which it was installed by or on behalf of Presien or an Authorised Channel Partner (or as otherwise permitted by the Documentation);

(b)allow your Users to access and use the Cloud Services; and

(c)use the Documentation,

in each case solely for your internal business operations, within the number of Licensed Devices and any other limits stated in your Order, and in accordance with the Documentation.

3.2 Per-device licensing

Licences are granted per Licensed Device. Each licence may be used with only one Licensed Device at a time. You must not share a licence across several devices, or move Device Software or a licence to another machine or device, without our prior written approval.

3.3 Presien OS

If your Order states that you have a perpetual licence to Presien OS, then once you have paid the applicable Fees in full, the licence in clause 3.1(a) applies to Presien OS without time limit, but only on the Licensed Device on which it was first installed and subject to clause 10.1.

3.4 Updates and changes

We continually improve the Presien Technology. We may modify or discontinue any functionality, including by delivering updates to Device Software automatically. You must install (or permit the installation of) any update that we designate as a security or safety update promptly after it is made available. We will not make a change that materially reduces the core functionality of a subscription you have paid for during its current Subscription Term, except where reasonably necessary for security, safety or legal compliance, or because a third-party supplier stops providing a service we rely on.

4. What you must not do

4.1 Restrictions

You must not, and must not permit any User or other person to:

(a)copy, modify, adapt, translate or create derivative works of the Presien Technology, except as expressly permitted by this Agreement;

(b)decompile, disassemble, reverse engineer or otherwise attempt to derive the source code, model weights, parameters, training data, algorithms or underlying structure of the Presien Technology or any AI Model, except to the extent that applicable law expressly permits this despite this restriction;

(c)use the Presien Technology, any Output, or any information about its performance to build, train, benchmark or improve a product, service or AI model that competes with the Presien Technology, or copy any of its features, functions, user interfaces or graphics;

(d)sell, license, distribute or otherwise make the Presien Technology available to any third party;

(e)remove, alter or obscure any proprietary notice, label or branding on the Presien Technology or the Documentation;

(f)bypass, disable, interfere with or circumvent any security, licensing, access control, monitoring or safety feature, or tamper with, move, cover or re-aim any camera or sensor except in accordance with the Documentation;

(g)use facial recognition, biometric matching or any other automated means to identify individuals from Footage, or use Customer Data or Presien Data to build profiles of individuals;

(h)use the Presien Technology or any Output to monitor or evaluate the performance or behaviour of any individual, or for any decision that has a legal or similarly significant effect on an individual, including decisions about employment, discipline, performance management, remuneration or access to a site;

(i)use the Presien Technology in a misleading, fraudulent, unlawful or harmful way, or in breach of any Law;

(j)upload or transmit any malicious code, or any Customer Materials that are unlawful or infringe the rights of any person;

(k)rely on the Presien Technology as a means of preventing death, personal injury, or damage to property or the environment (see clause 6); or

(l)attempt to do, or help anyone else do, any of the things listed above.

4.2 Monitoring compliance

We may monitor use of the Presien Technology (including through telemetry and usage data) to check compliance with this Agreement and to protect the Presien Technology.

5. Your data and our AI

5.1 Who owns what

As between you and us, you own the Customer Data, and Presien owns all right, title and interest (including all Intellectual Property Rights) in and to the Presien Data from the moment it is created.

5.2 Users

To the extent that you or any User acquires any right, title or interest in any Presien Data (including if it arises in the future), you assign (and must ensure that your Users assign) it to Presien with effect from its creation, and you must do anything we reasonably ask to confirm or perfect that assignment.

5.3 Back-up licence and moral rights

If, despite clauses 5.1 and 5.2, any right in Presien Data does not vest in or is not assigned to Presien (including because of the operation of any Law), you grant Presien a perpetual, irrevocable, worldwide, royalty-free, fully paid, transferable licence, with the right to sublicense through multiple tiers, to use, copy, store, modify, create derivative works of, analyse, disclose and otherwise exploit that Presien Data for any purpose. To the extent permitted by Law, you consent (and must ensure that each relevant individual consents in writing) to any act or omission by Presien or its licensees that would otherwise infringe any moral rights in Customer Data or Presien Data.

5.4 Your use of Presien Data

During the Subscription Term, Presien grants you a non-exclusive, non-transferable licence to access and use the Presien Data made available to you through the Presien Technology for your internal business purposes. You must not sell, publish or commercialise Presien Data, or use it for any purpose prohibited by clause 4.

5.5 Your Customer Data and our licence

You grant Presien and its related bodies corporate a perpetual, irrevocable, non-terminable, worldwide, royalty-free, fee-free licence, with the right to sublicense to any third party, to use, copy, store, modify, create derivative works of, analyse and otherwise process your Customer Data for any purpose.

5.6 How we use data

Without limiting clauses 5.2 to 5.5, we may use Customer Data and Presien Data to:

(a)provide, operate, maintain, support and secure the Presien Technology;

(b)develop, train, fine-tune, test, validate, benchmark and improve AI Models and our current and future products and services;

(c)create aggregated, de-identified or anonymised data and statistics, which we may use and disclose for any purpose;

(d)monitor compliance with this Agreement, prevent fraud and misuse, and enforce our rights;

(e)comply with Law, respond to lawful requests, and protect the safety of any person; and

(f)do anything else described in our Privacy Policy.

5.7 Training Opt-Out

If your Order includes our paid Training Opt-Out, then from the date it takes effect and for as long as you continue to pay for it, we will not use Customer Data captured or provided after that date, or Presien Data derived from it, to train or fine-tune AI Models. However:

(a)we may continue to use that data to test, validate, evaluate, benchmark and assure the safety and performance of AI Models, and for the other purposes in clause 5.6 (other than training);

(b)the Training Opt-Out applies only to data captured or provided after it takes effect, and does not require us to remove any data from, or retrain, any AI Model or dataset; and

(c)the Training Opt-Out does not affect Presien’s ownership of Presien Data or AI Models, or the licence in clause 5.5 for any purpose other than training.

5.8 Our AI Models

Presien owns all AI Models, regardless of whether they were developed, trained, fine-tuned, customised or configured using Customer Data or Presien Data, for you or at your request, or with your input. Nothing in this Agreement or any Order gives you any right, title or interest in any AI Model, and no AI Model (or any part of one) is a deliverable, customisation or customer-specific improvement owned by you.

5.9 Feedback

If you or your Users give us suggestions, ideas, comments or other feedback about the Presien Technology, we may use them for any purpose without obligation to you.

5.10 Personal information

Where Data Protection Laws require a data processing agreement between you and us (for example, under the GDPR), our data processing addendum attached to this Agreement and available at https://www.presien.com/dpa forms part of this Agreement and prevails over the rest of this Agreement to the extent of any inconsistency relating to personal data.

5.11 Your privacy and surveillance responsibilities

You control the sites, machines and workplaces where the Presien Technology is used, so you are responsible for, and warrant that you have complied and will comply with, the following:

(a)giving all notices, displaying all signs, and obtaining all consents and authorisations required under Data Protection Laws, workplace surveillance Laws and any other Laws for the installation and use of the Presien Technology (including cameras) at your sites and on your machines, and for the collection of Customer Data and its use and disclosure by Presien as described in this Agreement, including for AI training;

(b)informing Users and other individuals whose personal information may be captured that the Presien Technology is in use, and where they can find our Privacy Policy;

(c)complying with any obligation to consult with workers or their representatives about the introduction and use of the Presien Technology;

(d)not using the Presien Technology in any place where individuals have a reasonable expectation of privacy (such as toilets, washrooms, change rooms or sleeping quarters), or to capture images of people or places beyond your site, except where that is incidental to its normal operation; and

(e)promptly, and in any event within 7 calendar days after we (or your Authorised Channel Partner on our behalf) ask, displaying, distributing or otherwise giving any notice, sign or other information about the Presien Technology, the capture of Footage, or Presien’s collection, use or disclosure of Customer Data or Presien Data (including for AI training) that we reasonably request from time to time, in the form, manner and locations we reasonably specify, at your cost, and keeping it in place for as long as we ask. Our provision of any notice or wording does not mean that we have confirmed it is sufficient for you to comply with any Law, and does not limit paragraph (a).

5.12 Data access rights

Where a Law (including the EU Data Act) gives you a right to access, use or share data generated by your use of a connected product or related service, we will give you reasonable assistance to exercise that right, to the extent required by that Law and at your cost where the Law permits. If you obtained the Presien Technology through an Authorised Channel Partner, please make your request through the Channel Partner unless the Law requires otherwise.

5.13 Data when your subscription ends

When a Subscription Term ends:

(a)your access to the Cloud Services, and to Customer Data and Presien Data through the Cloud Services, ends;

(b)we may delete or retain your Customer Data (other than copies held in training, testing or validation datasets) in accordance with our data retention policy and the Law; and

(c)Presien Data and AI Models are not affected and remain Presien’s, and we may continue to use copies of Customer Data held in training, testing or validation datasets under the licence in clause 5.5.

You are responsible for exporting any data you need, including to meet your own record-keeping obligations, before your access ends.

5.14 Transfer

You confirm that you have all rights and consents needed to grant the licences in clauses 5.3 and 5.5. Those licences are not personal to Presien, and we may assign, novate, or transfer that licence to any person and you must do all things reasonably requested by us to assign, novate or transfer that licence. Those licences survive the end of this Agreement, and you may not require us to remove any Customer Data from any dataset or AI Model.

6. Safety

The Presien Technology is designed to help people working around heavy machinery see and respond to hazards. It is a valuable aid, but it has limits. This clause explains them.

6.1 Assistive technology only

The Presien Technology is an assistive technology. It is not a sole or primary safety control, and it does not replace human judgement, operator training, supervision, safe systems of work, exclusion zones, traffic management plans, spotters, or any other safety control or practice required at your site or by law. Operators remain responsible for the safe operation of their machines at all times.

6.2 Your safety responsibilities

You are responsible for, and must:

(a)carry out your own risk assessments and decide whether, where and how the Presien Technology is appropriate for each machine, task and site;

(b)maintain all other safety controls required by your risk assessments, site rules and Law, and not reduce or remove any of them because the Presien Technology is installed;

(c)ensure that the Presien Technology is installed, calibrated, configured, inspected, cleaned and maintained in accordance with the Documentation, including keeping cameras and sensors clean, unobstructed and correctly aimed;

(d)ensure that Users are trained and competent in the use of the Presien Technology, use it in accordance with the Documentation, and understand its limitations, and that operators check that it is functioning before each shift;

(e)install updates in accordance with clause 3.4;

(f)stop relying on the Presien Technology, and use other controls, if it is damaged, faulty, not functioning or showing a fault indication, and tell us or your Authorised Channel Partner promptly;

(g)report to your Authorised Channel Partner (or if you do not have an Authorised Channel Partner – directly to us) any incident or near miss involving a machine fitted with the Presien Technology within 48 hours, and give us reasonable access to relevant information; and

(h)comply with any reasonable direction by Presien in connection with the safe use of Presien Technology.

6.3 Known limitations

The Presien Technology uses cameras, computer vision and AI Models. Its performance can be adversely affected by many factors, including lighting, glare, darkness, weather, dust, mud, smoke, vibration, obstructions, camera position and condition, the speed and movement of people and machines, power supply, connectivity, and the clothing, posture and position of people. The Presien Technology and its Outputs will not detect every person, object or hazard, may detect hazards late, and may generate false alerts or miss alerts. AI Models may behave differently after updates.

6.4 Not a certified safety component

Unless the Documentation for a particular product expressly states otherwise, the Presien Technology is not designed, tested or certified as a safety-related control system or safety component under any safety standard.

6.5 No guarantee of outcomes

We do not warrant that use of the Presien Technology or reliance on any Output will:

(a)prevent or reduce the risk of any incident, injury or damage; or

(b)satisfy any safety, regulatory or contractual requirement that applies to you; or

(c)achieve any result in respect of worksite productivity or efficiency.

7. Third-party components and hardware

7.1 Open-source software

The Presien Technology may include open-source software, which is licensed to you under the terms of its own licence.

7.2 Third-party services

The Presien Technology relies on third-party services, such as cloud hosting, connectivity and AI services (including Google Gemini). Your use of features that rely on those services may be subject to additional terms that we make available to you. We are not responsible for any interruption, change or failure of a third-party service that is outside our reasonable control, and we may replace any third-party service provider at any time.

7.3 Hardware

Hardware (including cameras, displays, compute units and cabling) is sold separately by an Authorised Channel Partner, or by its manufacturer, under separate terms.

8. Fees and payment

8.1 If you bought through an Authorised Channel Partner

You pay the Channel Partner in accordance with your agreement with the Channel Partner. If the Channel Partner tells us that you have not paid amounts due for the Presien Technology, clause 9.3 applies.

8.2 If you buy directly from Presien

If you have an Order with Presien:

(a)subscription Fees are charged per Licensed Device and invoiced by us from time to time in advance, unless your Order states otherwise;

(b)you must pay each invoice within 14 days after the invoice date, without set-off or deduction;

(c)we may charge interest on overdue amounts at the Reserve Bank of Australia's cash rate target plus 4% per annum, calculated daily, and recover all costs relating to collection (including legal fees on the full indemnity basis); and

(d)we may change our prices by giving you at least 90 days’ notice. A price change applies to the relevant Licensed Device from the start of that device’s next renewal term, and not during a current Subscription Term.

8.3 Taxes

Fees exclude GST and all other taxes, duties and charges, which you must pay in addition (other than taxes on our net income). If any law requires you to withhold tax from a payment to us, you must increase the payment so that we receive the amount we would have received without the withholding.

8.4 Disputed invoices

If you dispute an invoice in good faith, you must tell us in writing, with reasons, within 10 calendar days of the invoice date and pay the undisputed portion by the due date. An invoice not disputed in that time is taken to be accepted.

9. Term, renewal and suspension

9.1 Term

This Agreement starts when you accept it and continues until all Subscription Terms and licences under it have ended or it is terminated.

9.2 Subscription Term and renewal

Each Subscription Term starts and ends as stated in the Order. Unless the Order states otherwise, each Subscription Term automatically renews for successive 12-month periods unless either party gives the other at least 60 days’ written notice of non-renewal before the end of the then-current term.

9.3 Suspension

We may suspend all or part of your (or any User’s) access to the Presien Technology, including the Cloud Services and any Device Software features that depend on them:

(a)immediately, if we reasonably believe this is necessary to prevent or address a security threat, a risk to any person’s safety, unlawful use, or a breach of clause 4;

(b)on 7 days’ notice, if any amount payable for the Presien Technology (to us or to an Authorised Channel Partner) is overdue, or you breach this Agreement in any other way; or

(c)if an Authorised Channel Partner’s right to supply the Presien Technology to you ends and you have not entered into an alternative arrangement under clause 9.4.

Before suspending any feature that provides in-cab alerts, we will give you written notice (except where paragraph (a) applies and notice is not reasonably practicable). We will restore access promptly once the reason for suspension has been resolved. Suspension does not affect your obligation to pay Fees.

9.4 If your Channel Partner stops supplying Presien Technology

If an Authorised Channel Partner stops being authorised to supply the Presien Technology, we will use reasonable efforts to allow your licence to continue until the end of the Subscription Term you have already paid for, subject to any run-off arrangements between us and the Channel Partner, and we may offer you the option of contracting with us directly or through another Authorised Channel Partner.

10. Termination

10.1 Termination by us

We may terminate this Agreement, or any licence or Order under it, by notice to you:

(a)if you materially breach this Agreement and, where the breach can be remedied, you do not remedy it within 30 days after receiving notice from us;

(b)if you materially breach this Agreement and the breach cannot be remedied;

(c)if you are in material breach of your agreement with the Authorised Channel Partner relating to the Presien Technology, or that agreement is terminated;

(d)immediately, if you breach clause 4 or infringe our Intellectual Property Rights; or

(e)immediately, if you suffer an Insolvency Event.

10.2 Termination by you

You may terminate this Agreement by notice to us if we materially breach it and, where the breach can be remedied, we do not remedy it within 30 days after receiving notice from you. If you obtained the Presien Technology through an Authorised Channel Partner, your rights to end your agreement with the Channel Partner are governed by that agreement.

10.3 What happens when this Agreement or a licence ends

When this Agreement or a licence ends for any reason:

(a)all licences granted to you for the affected Presien Technology end, you must stop using it, and we may remotely disable the affected Device Software and Cloud Services;

(b)your access to the Cloud Services ends immediately;

(c)you must pay all Fees due up to the date of termination and, if we terminate under clause 10.1, the Fees for the remainder of the current Subscription Term become immediately payable;

(d)you must return or destroy our Confidential Information; and

(e)clauses 5, 6, 10.3, 11 to 15, 19 and 20, and any other clause that by its nature is intended to survive, continue in force.

Termination does not affect any rights or remedies that accrued before termination.

11. Intellectual property

11.1 Ownership

Presien and its licensors own all Intellectual Property Rights in the Presien Technology, the AI Models, the Presien Data, the Documentation and any Feedback, and in all improvements, enhancements, modifications and derivative works of any of them, whoever creates them, but not in Customer Data.

11.2 Trade marks

Presien’s names, logos and product names are our trade marks. Nothing in this Agreement gives you any right to use them.

11.3 Infringement claims

If a third party claims that your use of the Presien Technology in accordance with this Agreement infringes its Intellectual Property Rights, or we reasonably believe that such a claim is likely, we may, at our option and cost:

(a)obtain the right for you to continue using the affected Presien Technology;

(b)modify or replace it so that it no longer infringes, without materially reducing its functionality; or

(c)if neither (a) nor (b) is commercially reasonable, terminate the licence for the affected Presien Technology and refund any prepaid Fees you paid to us for the unused part of the Subscription Term.

To the extent permitted by Law, this clause states your sole remedy for any third-party infringement claim.

12. Warranties and disclaimers

12.1 Our limited warranty

For Cloud Services we supply to you under an Order with Presien, we warrant that we will provide them with due care and skill and that they will perform materially in accordance with the Documentation. If they do not, we will, at our option, correct or re-supply the affected Cloud Services, or refund the Fees paid to us for the affected Cloud Services for the period of non-conformity. If you obtained the Presien Technology through an Authorised Channel Partner, any warranty and support is provided by the Channel Partner, not Presien.

12.2 Disclaimer

Except as expressly stated in this agreement and subject to clause 12.3, the Presien Technology, AI Models, Outputs and Presien Data are provided “as is”. To the maximum extent permitted by law, Presien excludes all representations, warranties, conditions and guarantees, whether express, implied or statutory.

12.3 Rights that can’t be excluded

Nothing in this Agreement excludes any term implied or imposed by any Law that cannot lawfully be excluded or limited, including the consumer guarantees under the Australian Consumer Law (“Non-Excludable Rights”). Where a Non-Excludable Right applies our liability for breach of it is limited, at our option, to:

(a)for goods: replacing or repairing the goods, supplying equivalent goods, or paying the cost of doing so; and

(b)for services: supplying the services again, or paying the cost of having them supplied again.

12.4 Statements by Channel Partners

Any representation, warranty or commitment about the Presien Technology made by an Authorised Channel Partner or its personnel is made by the Channel Partner alone and does not bind Presien.

12.5 Outputs

(a)Outputs are generated by AI Models, including third-party models, and may be inaccurate, incomplete or misleading. They assist human decision-making only, are not advice, and do not replace your own judgement.

(b)Subject to clause 12.3, Presien does not warrant that any Output is accurate, complete or fit for any purpose. An inaccurate Output is not, of itself, a breach of clause 12.1.

13. Limitation of liability

13.1 Excluded loss

To the maximum extent permitted by law and subject to clause 12.3, Presien is not liable to you, whether in contract, tort (including negligence), under statute, in equity or otherwise, for any:

(a)loss of profit, revenue, production, productivity, contract, business or anticipated savings;

(b)loss or corruption of data;

(c)business interruption, or downtime of any machine, plant or site;

(d)loss of goodwill or reputation;

(e)fines, penalties or liquidated damages payable by you to any person; or

(f)indirect, consequential, special, incidental, exemplary or punitive loss or damage,

in each case however arising, and even if Presien knew it was possible.

13.2 Liability cap

To the maximum extent permitted by law and subject to clause 12.3, Presien’s total aggregate liability to you whether arising out of or in connection with:

(a)the Presien Technology;

(b)this Agreement or any other agreement between you and us; or

(c)any other fact, matter or circumstance,

whether in contract, tort (including negligence), under statute, in equity or otherwise, and including for death or personal injury, is limited to the lesser of:

(d)the fees received by Presien (directly from you or through an Authorised Channel Partner relating to its contract with you) in the 12 months before the event first giving rise to the liability; and

(e)AUD1,000,000.

13.3 Contribution

Presien’s liability is reduced to the extent that any loss or damage is caused or contributed to by you, your Users, an Authorised Channel Partner, any installer or any other third party, or by a failure to comply with clause 6.2.

13.4 Time limit for claims

To the extent permitted by Law, you must commence any cause of action against Presien within 12 months after the date on which you became aware, or ought reasonably to have become aware, of the facts giving rise to it, after which the cause of action is barred and you release us from that cause of action.

13.5 Who else benefits

The exclusions and limitations in this clause 13 and in clause 12, and the indemnity in clause 14, also benefit Presien’s related bodies corporate, licensors, suppliers and personnel, and Presien accepts your promises on their behalf and holds the benefit of them on trust for those persons.

14. Your indemnity

14.1 Indemnity

You indemnify Presien, its related bodies corporate and their respective officers, employees, contractors and agents against all loss, damage, liability, costs and expenses (including legal costs on a full indemnity basis), and, to the extent permitted by Law, any fine or penalty, arising out of or in connection with any claim, cause of action, demand, proceeding or investigation by any third party to the extent it arises out of or in connection with:

(a)your or your Users’ use or operation of the Presien Technology, or of any machine or site where it is installed, other than in accordance with this Agreement and the Documentation;

(b)any breach of clause 5.11 (privacy and surveillance responsibilities) or clause 4 (what you must not do) or clause 6.2 (Your safety responsibilities);

(c)any failure by you or your Users to comply with any Law;

(d)your Customer Materials;

(e)death, personal injury or property damage in connection with the Presien Technology (including relating to any User); or

(f)any representation or commitment that you make to any person about the Presien Technology,

except to the extent the loss is caused by Presien’s fraud, or misconduct, or negligence or breach of this Agreement.

14.2 Survival

This indemnity survives the end or termination of this Agreement.

15. Confidentiality

15.1 Our Confidential Information

You must keep confidential, and use only for the purposes of this Agreement, all non-public information about Presien and the Presien Technology, including software, AI Models, Documentation, pricing, product roadmaps, performance and testing information, and security information (“Confidential Information”). You may disclose it only to Users and professional advisers who need to know it and are bound by confidentiality obligations, or where required by Law.

15.2 Your Confidential Information

We will keep confidential any non-public information about your business that you give us in connection with this Agreement and that you identify as confidential, except as permitted by this Agreement. We may disclose that information to third parties who need to know it and are bound by confidentiality obligations, or where required by Law. Clause 5 governs our use of Customer Data and Presien Data, and nothing in this clause limits our rights under that clause.

16. Export controls, sanctions and compliance

16.1 Compliance

Each party must comply with all export control, import and sanctions Laws that apply to it in connection with the Presien Technology, including those of Australia and the European Union.

16.2 Restricted destinations and users

You must not export, re-export, transfer or provide access to the Presien Technology:

(a)to any country or region that is subject to comprehensive sanctions or an embargo;

(b)to any person on a sanctions or restricted party list maintained by any of the governments referred to in clause 16.1; or

(c)for any military end use, or for any end use relating to nuclear, chemical or biological weapons or missiles.

You confirm that you are not a person of the kind described in paragraph (b).

17. Changes to this Agreement

17.1 Updates

We may update this Agreement from time to time, for example to reflect changes to the Presien Technology, our business or the Law.

17.2 Material changes

If an update materially and adversely affects your rights, we will give you at least 30 days’ notice (by email, through the Cloud Services, or through your Authorised Channel Partner). The update will apply to you from the start of your next Subscription Term that begins after the notice period ends, unless the update is required by Law, relates to security or safety, or relates only to new features or products, in which case it applies from the date stated in the notice.

17.3 Other changes

Any other update takes effect when it is published. If you do not agree to an update, you may choose not to renew your subscription. Continuing to use the Presien Technology after an update applies to you means you accept it.

18. Publicity

18.1 Your publicity

You must not use Presien’s name or trade marks, or publicise your use of the Presien Technology, without our prior written consent.

18.2 Our publicity

If you buy directly from Presien, we may identify you as a customer and use your name and logo in proposals, presentations and customer lists.

19. Governing law

This Agreement is governed by the laws of New South Wales, Australia. You submit to the exclusive jurisdiction of the courts of New South Wales and the courts that hear appeals from them. No party may challenge the jurisdiction of New South Wales as the forum in which disputes are heard. Presien may also bring proceedings in any other court of competent jurisdiction to protect its Intellectual Property Rights or Confidential Information or to recover amounts owed to it.

20. General

20.1 Assignment

You may not assign, novate or otherwise transfer this Agreement or any rights under it without our prior written consent. We may assign, transfer or novate all right, title and interest under this Agreement to any person by notice to you, and you agree to sign any document reasonably required to give effect to that assignment, transfer or novation.

20.2 Subcontracting

We may use subcontractors and service providers to perform any of our obligations or exercise any of our rights under this Agreement.

20.3 Events beyond our control

We are not liable for any failure or delay in performing this Agreement caused by an event beyond our reasonable control, including failure of telecommunications, power, cloud hosting or AI service providers, failure of an upstream supplier, natural disaster, pandemic, industrial action, cyber-attack, war, terrorism or government action. If such an event prevents us from performing our obligations for more than 3 months, either party may terminate the affected Order by notice, and we will refund prepaid Fees for anything not supplied.

20.4 Notices

Notices to Presien must be sent to legal@presien.com. We may give you notices at the address or email address in your Order or associated with your account, through the Cloud Services, or through your Authorised Channel Partner. A notice sent by email is taken to be received when it is sent, unless the sender receives an automated message that it was not delivered within 24 hours of it having been sent.

20.5 Entire agreement

This Agreement is the entire agreement between you and Presien about its subject matter and replaces all earlier discussions, representations and agreements between you and Presien about that subject matter. You confirm that you have not relied on any representation that is not set out in this Agreement, including any representation by an Authorised Channel Partner. Each party waives any right to claim this Agreement contains any implied terms.

20.6 Severability

If any provision of this Agreement is invalid or unenforceable in any jurisdiction, it is to be read down to the extent necessary to make it valid or, if that is not possible, severed for that jurisdiction, without affecting the rest of this Agreement.

20.7 Waiver

A failure or delay in exercising a right does not waive that right. A waiver is effective only if it is in writing and signed by the party giving it.

20.8 Relationship

The parties are independent contractors. Except as stated in clause 2.2(a), no Authorised Channel Partner is Presien’s agent, and nothing in this Agreement creates a common law partnership, joint venture or employment relationship between Presien and the Authorised Channel Partner, or Presien and you. You must not claim that any statement made by an Authorised Channel Partner binds Presien to any obligation.

20.9 Electronic acceptance

This Agreement and any Order may be accepted or signed electronically and in counterparts.

20.10 Interpretation

Headings, the summary at the start of this Agreement and introductory notes are for convenience only and do not affect interpretation. The words “including”, “for example” and similar expressions do not limit what else may be included. A reference to a Law includes any amendment or replacement of it.

21. Words we use

In this Agreement:

21.1AI Model means any artificial intelligence or machine learning model, deep learning model, algorithm, neural network or similar technology used in or with the Presien Technology, including its architecture, weights, parameters, embeddings, prompts, training, testing and validation datasets, annotations and labels, and all versions, improvements, modifications and derivatives of any of them;

21.2Authorised Channel Partner or Channel Partner means an original equipment manufacturer, distributor, dealer, reseller or other person authorised by Presien to supply products or services that include, or are supplied with, the Presien Technology, whether under Presien’s brand or the Channel Partner’s own brand;

21.3Cloud Services means Presien’s hosted software, platforms, portals, dashboards, applications and APIs (including Presien Cloud, Presien Reporting, /loop and Presien Agent), whether accessed directly or through a Channel Partner’s platform or brand;

21.4Confidential Information has the meaning given in clause 15.1;

21.5Customer Data means:

(a)Footage, and raw sensor, location and GPS data, captured by the Presien Technology from your Licensed Devices, machines or sites;

(b)records of alerts, events and machine activity at your sites that are made available to you through the Presien Technology;

(c)Outputs; and

(d)Customer Materials,

excluding and except to the extent it would comprise Presien Data;

21.6Customer Materials means content, files, documents, information and instructions (including prompts) that you or your Users upload, submit or input into the Cloud Services, excluding and except to the extent it would comprise Presien Data;

21.7Data Protection Laws means all Laws relating to privacy, personal information, data protection or surveillance that apply to a party, including the Privacy Act 1988 (Cth), the workplace surveillance Laws of each Australian State and Territory, the EU General Data Protection Regulation, the UK GDPR, and applicable United States, Canadian and New Zealand privacy Laws;

21.8Device Software means firmware, Presien OS, edge software and any other software embedded in or installed on a Licensed Device, including updates;

21.9Documentation means the user guides, installation and operating instructions, safety information, specifications and other documentation for the Presien Technology made available by Presien, or by an Authorised Channel Partner with Presien’s approval, as updated from time to time;

21.10Feedback means any suggestion, idea, comment or other feedback referred to in clause 5.9;

21.11Fees means the fees for the Presien Technology set out in an Order;

21.12Footage means video, images and still frames captured by or through the Presien Technology, and related metadata;

21.13Insolvency Event means a party being unable to pay its debts as and when they fall due, having a liquidator, administrator, receiver or similar officer appointed to it or any of its assets, entering into an arrangement or composition with its creditors, or anything analogous under the Law of any jurisdiction;

21.14Intellectual Property Rights means all present and future intellectual property and related rights anywhere in the world, whether registered or unregistered, including copyright, patents, trade marks, designs, circuit layouts, trade secrets, know-how, Confidential Information, and rights in databases and data;

21.15Law means any law, regulation, code or binding requirement of any government or regulator, in any jurisdiction, that applies to a party or to the use of the Presien Technology;

21.16Licensed Device means each machine, vehicle, camera, compute unit or other item of equipment for which a licence or subscription to the Presien Technology has been obtained, as identified in an Order or in the Cloud Services;

21.17Non-Excludable Rights has the meaning given in clause 12.3;

21.18Order means any order form, quote, proposal, statement of work, purchase order acknowledgement or similar document under which you obtain the right to use the Presien Technology, whether entered into with Presien or with an Authorised Channel Partner;

21.19Outputs means alerts, notifications, event clips, reports, dashboards, analytics, summaries, responses and any other output generated by or through the Presien Technology and made available to you;

21.20Presien Data means all data and content that is generated, derived or inferred by or through the Presien Technology or in connection with its use, including:

(a)model inferences, detections, classifications, bounding boxes, confidence scores, embeddings and features;

(b)annotations and labels, and training, testing and validation datasets and other compilations, including those that incorporate Customer Data;

(c)device performance, diagnostic, system log, configuration, account and usage data; and

(d)aggregated, de-identified or anonymised data;

21.21Presien Technology means the Device Software, Cloud Services, AI Models, Documentation and any other software, technology or services made available by Presien (directly or through an Authorised Channel Partner), including all updates, upgrades and new versions, whether supplied under Presien’s brand or a Channel Partner’s brand. It does not include hardware;

21.22Privacy Policy means Presien’s privacy policy published at https://www.presien.com/privacy-policy, as updated from time to time;

21.23Subscription Term means the period for which you are licensed to use the Presien Technology for a Licensed Device, as set out in an Order (including any renewal), and for a perpetual licence under clause 3.3, the period described in that clause;

21.24Training Opt-Out means the optional service described in clause 5.7, available for an additional Fee set out in an Order; and

21.25Users means your employees, contractors, operators, agents and any other individuals who use, operate or access the Presien Technology (including by operating a machine fitted with a Licensed Device) on your behalf or with your permission.

info@presien.comLinkedIn
YouTubeCareers
Terms & Conditions
Privacy PolicyDesign by MonokotoCopyright Presien 2025